VVDI BIMTool Pro New Features:
- Add Ethernet port, Support 10/100M programming via Ethernet.
- Support WIFI 802.1b/g, 150Mbps high-speed connection, and WIFI OTA upgrade
- Support DoIP Vehicle/Module Programming
- Support BMW ECU programming (NBT/CIC) (connect via network cable)
- Greatly speed up the F/G Chassis programming (connect via network cable)
- Support BMW E-sys and Rheingold Diagnostic System. Able to replace the specialized devices. (connect via network cable)
- Support directly read ISN data without disassembling the ECU (N13 / N20 / N55 / N63)
- Works on All Windows computer, like win7, win8, win10, no computer operation system limitation.
Note:
- Don't use the Enternet cable and USB cable at the same time. For key programming,use usb cable,coding use Enternet cable.
- When connect VVDIBIM device with PC, it will display"Booting" on little screen, after 20 secs it will display as "BMW", then it is connected OK.
- VVDI BIMTool Pro and VVDI BMW Tool use same software, and some functions in the software will prompt you to use bimtool.
VVDI BIM Tool Pro Functions:
OBD Key Learn: Support CAS1/ CAS2/ CAS3/ CAS3+/ CAS3+ISTAP/ CAS4/ CAS4+ version.
File Key Making: Support CAS1/ CAS2/ CAS3/ CAS3+/ ISTAP/ CAS4/ CAS4+,etc. As for CAS1/ CAS2/ CAS3/ CAS3+ system, support reading EEPROM and synchronous code data.
Support FEM/ BDC System Generating Key, Replacing FEM/ BDC Control Units, Reset Mileage.
Mileage Correction: Support CAS1/ CAS2/ CAS3/ CAS3+/ ISTAP/ CAS4/ CAS4+ odometer correction.
Detail Functions of VVDI BIMTool:
1. E-Series programming, coding, DTCs
- Support autodetect car chassis
- Support scan all car units
- Support calculate all configuration units
- Support read/write car configuration(FA)
- Support input HW/ZB number to programming
- Support calculate default coding from FA
- Support edit detail coding information, change car config
- Support many languages DTC code
2. F-Series programming, coding, DTCs
Support autodetect car chassis
- Support read/write car configuration(FA)
- Support calculate programming files from unit, car, whold database
- Support calculate default coding from FA
- Support edit detail coding information, change car config
- Support detail special function list from coding
- Support many languages DTC code
3. CAS1/CAS2/CAS3/CAS3+/CAS3++ISTAP OBD key learning
- Support read key information, write key inforamtion
- Support key learning
- Support read/write EEPROM
- Support read ECU/gearbox synchronize codes
- Support write ECU/gearbox synchronize codes
- Support synchronize ECU and CAS
- Support synchronize CAS and ELV
- Support read ISN via OBDII
- Support reset KM via OBDII
- Support disable key/enable key
4. CAS4(1L15Y)/CAS4+(5M48H) OBD key learning:
- Support read CAS encrypt key via OBDII
- Support key learning via programmer and via ignition switch
- Support disable key/enable key
- Support erase key position
- Support reset KM via OBDII
- Support read ISN via OBDII
- Support backup/restore coding
- Support update original CAS4 file
5. FEM/BDC OBD key learning:
- Support read FEM/BDC encrypt key via OBDII
- Support key learning via programmer and via ignition switch
- Support disable key/enable key
- Support erase key position
- Support reset KM via OBDII
- Support read ISN via OBDII
- Support backup/restore coding
- Support exchange used FEM/BDC
- Support close/open transport mode
- Support reset ECU lock
- Support switch on ignition without working key
6. CAS EEPROM dump key learning:
- Support EWS1, EWS2, EWS3, EWS4, CAS1(0K50E), CAS2(2K79X), CAS3(0L01Y), CAS3+(0L15Y), CAS3++ISTAP(0L15Y, 0M23S)
- Support prepare dealer key via programmer
- Support disable key/enable key
- Support read ISN from working key
7. 8HP Gearbox renew:
- Support clear ISN in 8HP gearbox
- Support backup/restore coding
- Support reset adaptation information
8. Read synchronize code from E-Series ECU: Support MEV9N46L, MSV70, MSS60, MS450, N62 etc
9. Read E-Series/F-Series ECU ISN via OBDII
- Support MSV80, MSV801, MSD80, MSD81, MSD802, MSD812, MSD851
- Support MED17xx/MVD17xx/MEVD17xx/MV1722
- Support MED172/MEV17N46/ME17N45
- Support MEVD172Y/MEVD172/MEVD1725/B38/X63TU
10. Support exchange ECU and CAS:
- Support write ECU ISN via OBDII
- Support write ECU VIN via OBDII
- Support change ECU ISN and VIN with EEPROM dump
- Support chagne CAS1/CAS2/CAS3/CAS4 ISN and VIN with EEPROM dump
11. CAS repair(OBD&EEPROM)
- Support repair ISTAP CAS
- Support repair CAS EEPROM(Service mode EEPROM), you can start engine after repair the file(CAS1,CAS2,CAS3,CAS3+,CAS3++ISTAP)
12. CAS3+/CAS4+ lost all dump file support restore ISN and VIN
- Support CAS3+(1L15Y) encrypt version
- Support CAS3++(ISTAP) version
- Support CAS4+(5M48H) version
13. File KM calibration
- Support EWS1, EWS2, EWS3, EWS4
- Support CAS1(0K50E), CAS2(2K79X), CAS3(0L01Y), CAS3+(0L15Y, 0M23S)
- Support CAS4(1L15Y), CAS4(5M48H, 1N35H)
- Support E-Series dashboard EEPROM(M35080)
- Support F-Series dashboard EEPROM(35160, 35128)
- Unlock HITAG2 key: Support lock hitag2 key made from BMW TOOL via programmer
- EWS3/EWS4 can read EEPROM, write EEPROM via CAS PLUG