Angle Miling Cutter U01 HSSM35 φ60.4x5.25xφ9.525x80°
Item Code: VD17026
Product Categories: Cutter
Manufacturer: MK3
- Available in Stock
Item Code: VD17026
Product Categories: Cutter
Manufacturer: MK3
Manufacturer: MK3
Condition: New
size: φ60.4x5.25xφ9.525x80°
Type: U01
Material : Carbide
1.Before running the machine, it is necessary to accurately adjust the cutter to ensure the key blank is matching with the mother key, and to avoid the tool being broken due to the unstable key assembly.
2.The cutter is clamped on the machine and the key blank and the mother key are fixed on the clamps. Do not clamp the key blank too tight. The patent key is close to the tracer and the key blank is close to the cutter. If the key blank is not fastened, the key blank should be removed and re-clamped.
3.When the machine is not running, clamp the cutter and cut from the left-to-right to check if the position of the parent key and the key blank are uniform. If not, re-clamp again.
4.After the machine is running, should wait the cutter is fully rotated before cutting.
5.When the key blank is close to the cutter, the clamp should be held to prevent the key blank from hitting the cutter after the cutter is fully rotated before cutting. So the first cutter tip which just touched the key blank won’t be damaged by uneven force.
6.When start to cut the key, it should slowly to push the clamp which fixed the key blank, so that the cutter tip won’t be damaged by uneven force.
UNOCODE, LEONARDO, ULTERCODE, UNOCODE 299 , 399